Fsain Technology has a rich product range, including radio detector, detection radar, photoelectric detection camera, radio jammer, navigation spoofer, multi-mission defender, etc. Today we will introduce our products & solutions advantages. Please see below.

- Multiple Detection Methods

The system integrates the existing detection methods of drone spectrum detection equipment, low-altitude detection radar, photoelectric equipment and ADS-B, forming a complementary advantage and disadvantage, solving the problem that drone spectrum equipment cannot recognize silent targets, low-altitude detection radar has many false alarms, and photoelectric equipment needs to be guided. At the same time, the integration of multiple detection methods can effectively avoid interference caused by environmental factors such as visual blind spots, complex electromagnetic environments, and sea clutter

- Fast Detection Speed

The system uses two-dimensional three-coordinate active phased array radar and high-performance AOA detection equipment. The radar can achieve a reporting rate of 0.7s in tracking mode, and the detection can achieve a refresh rate greater than 1Hz. It can update the airspace situation in real time within 1s, and can effectively, quickly and in real time update the airspace situation. It can effectively detect and track low-altitude small drones such as ground-based drones and sea drones that use equipment blind spots to sneak in.

- Long Suppression Distance, No Blind Spots

The system uses a variety of suppression methods, including but not limited to navigation decoy equipment, radio signal protocol analysis equipment, and radio interference equipment (directional). Except for navigation decoy equipment, the remaining equipment can reach a working distance of more than 3km. For drones taking off from far or near, they can achieve effective interference. The antenna coverage angle is large and the turntable rotates quickly, which can achieve the effect of no blind spots, no dead angles, and full shielding.

- Unmanned System

The system can automatically perform multiple functions such as target detection and identification, command and control, and interference disposal. It has high integration and powerful functions. It supports both manned and unmanned states. In unmanned mode, it automatically warns drones entering the warning area and suppresses drones entering the core area.

- Multi-detection Source Fusion Algorithm

Although the multiple detection methods used by the system solve the inherent defects of each device, they will also lead to multiple detection data reporting targets, resulting in misjudgment of the airspace situation. Therefore, this system integrates a multi-detection source fusion algorithm, which makes a comprehensive judgment based on the confidence of the radar reported data and the device position and direction reported by the detection device. For suspected targets that are not in the photoelectric blind area and whose target position is within the photoelectric detection range, the final judgment is made through photoelectricity. After this logic, the false alarms of the radar and the problem that the detection equipment cannot take effect on silent targets can be effectively reduced.

- Easy to Deploy, Automated, and Simple to Operate

The command and control system adopts an intelligent management platform, which can realize functions such as automatic detection of the system, automatic linkage countermeasures, and unmanned operation; the system supports portable installation and fixed installation, and the platform starts the protection system with one button, which is easy to operate.